Cisco Cisco Video Surveillance 4 Port Encoder 数据表
© 2012 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public.
Page 2 of 4
Product Specifications
Features and Benefits
Features include the following:
●
Up to D1 resolution per port
●
Up to 30 frames per second (FPS) at D1 resolution (180 FPS maximum across all ports/channels)
●
H.264, MPEG-4, and MJPEG compression options
●
Up to two simultaneous video streams per port
●
Up to five privacy mask windows per port
●
Up to three motion detection windows per port
Table 1 lists product specifications for the Cisco Video Surveillance 4-Port Encoder.
Table 1.
Product Specifications
General
Analog Video Input Ports
4
Digital Alarm Inputs
4
Digital Alarm Outputs
4 (maximum voltage 12V; maximum sync 100mA)
Security
Password-protected administrative interface;
HTTPS access to the administrative interface
Certifications/Ratings/Patents
CE, FCC Class B, C-Tick UL/cUL listed
Electrical
Port
RJ-45 connector for 100/1000 BASE-TX
Auto MDI/MDI-X
Cable Type
Cat5 or better
Power Input
12 VDC/24 VAC (power supply included)
Power Consumption
24W (max)
Environmental
Operational Temperature
50
to 122
F (10
to 50
C)
Operational Humidity
20% to 80%, noncondensing
Physical
Dimensions (LxWxH)
189 x 153 x 49.3 mm
Weight
800g
Video and Audio
Video Encoding
H.264, MPEG-4, and MJPEG (for both PAL and NTSC)
Video Streams
Up to two simultaneous streams; the second stream is variable based on the setup of the primary stream
Audio In
RCA connector
G.711 audio encoding (64 Kbps)
G.711 audio encoding (64 Kbps)
µ
-Law or A-Law mode selectable
Audio input (up to 1V RMS), line-in
Supports two-way audio (per channel)
Supports audio mute
Supports two-way audio (per channel)
Supports audio mute
Audio Out
Terminal block x 4
Supports two-way audio (per channel)
Mono output
Supports two-way audio (per channel)
Mono output
PTZ Serial Interface
RS-485 Half-Duplex, supporting Pelco-D protocol