Cisco EFG120 EtherFast Network Attached Storage V 1.0 管理员指南
Configuring your Storage
Adding a Disk Drive to an Array
Linksys Small Business NSS4000 and NSS6000 Series Network Storage System Administration Guide
46
4
NOTE
When adding disks to an array, we recommend that you use the same model
of disk with the same capacity. The new disk must have at least the same
capacity of the smallest disk currently in the array. With the exception of a
JBOD, RAIDs are configured to use the maximum of the smallest disk
capacity in the array for each additional disk in the array. For example, if you
install two, 250 GB disks and one 500 GB disk, the total capacity is 750 GB.
of disk with the same capacity. The new disk must have at least the same
capacity of the smallest disk currently in the array. With the exception of a
JBOD, RAIDs are configured to use the maximum of the smallest disk
capacity in the array for each additional disk in the array. For example, if you
install two, 250 GB disks and one 500 GB disk, the total capacity is 750 GB.
To add a disk to an array:
STEP 1
If not already installed in the chassis, insert the disk in the NSS.
STEP 2
From the Manager Menu, click Storage
RAID.
The RAID page appears.
STEP 3
In the RAID Arrays table, click Edit for the applicable RAID array.