Cisco Cisco Content Switching Module 技术手册
HTTP Redirect for the Content Switching Module
Configuration Example
Configuration Example
Document ID: 47960
Contents
Introduction
Prerequisites
Requirements
Components Used
Related Products
Conventions
Configure
Network Diagram
Configurations
Verify
Troubleshoot
Related Information
Prerequisites
Requirements
Components Used
Related Products
Conventions
Configure
Network Diagram
Configurations
Verify
Troubleshoot
Related Information
Introduction
This document provides a sample configuration for configuring HTTP redirect on the Content Switching
Module (CSM). Redirects can be used to send a client to a remote site when, for example, the main site is
down for maintenance or any other reason.
Module (CSM). Redirects can be used to send a client to a remote site when, for example, the main site is
down for maintenance or any other reason.
Prerequisites
Requirements
There are no specific requirements for this document.
Components Used
The information in this document is based on these software and hardware versions:
CSM version 3.x
•
Native IOS 12.1E
•
The information in this document was created from the devices in a specific lab environment. All of the
devices used in this document started with a cleared (default) configuration. If your network is live, make sure
that you understand the potential impact of any command.
devices used in this document started with a cleared (default) configuration. If your network is live, make sure
that you understand the potential impact of any command.
Related Products
This configuration can also be used with these hardware and software versions:
CatOS 7.x
•
Multilayer Switch Feature Card (MSFC) IOS 12.1E
•