Cisco Cisco Unified MeetingPlace 7.0 快速安装指南
Configuring Application Server Failover for Cisco Unified MeetingPlace
How to Configure Application Server Failover
6
* Error:
'/opt/cisco/meetingplace/database/versions/IIF.10.00.UC5XL/etc/sqlhosts not
initialized. xxxxxx is missing'
* Forcing the fix
The final message, which indicates if the process was successful, is:
Database Replication changes for this machine (Host = <hostname>; IP Addr = <ip
addr>) is SUCCESSFUL
Related Topics
•
Installation, Upgrade, and Migration Guide for Cisco Unified MeetingPlace at
•
module
What To Do Next
Proceed to the
Setting Up Failover for One Existing Application Server and One Newly
Installed Application Server
Installed Application Server
In this task:
•
Node 1 is the existing Application Server.
•
Node 2 is the new Application Server.
Before You Begin
•
Complete the
•
Read the
•
module.
Caution
Performing this task temporarily brings down your Cisco Unified MeetingPlace system. Proceed only
during a scheduled maintenance period.
during a scheduled maintenance period.
Procedure
Step 1
Install the second Application Server (Node 2), ensuring the following:
•
To reduce system downtime during this procedure, enter the Node 2 eth0:0 (or any valid and
currently unused) IP address and hostname when you configure “Ethernet Port 1(device eth0)” on
the Network Setup page.
currently unused) IP address and hostname when you configure “Ethernet Port 1(device eth0)” on
the Network Setup page.
This configuration is temporary; you will change the eth0 IP address and hostname to the correct
value later in this procedure.
value later in this procedure.
•
Node 1 and Node 2 server times must be synchronized with each other.
Step 2
Log in to the CLI of Node 1.
If you are logging in remotely, use the Node 1 eth0 IP address or hostname.