Cisco Cisco MeetingPlace Gateway SIM 快速安装指南
Configuring Call Control for Cisco Unified MeetingPlace
How to Configure Call Control for Video Conferencing with H.323 Endpoints
16
Procedure
Step 1
On the Cisco router, enter privileged EXEC mode or any other security level set by a system
administrator. Enter your password if prompted.
administrator. Enter your password if prompted.
Router# enable
Step 2
Enter global configuration mode.
Router# configure terminal
Step 3
Enter gatekeeper configuration mode.
Router# gatekeeper
Step 4
Define the zone controlled by the gatekeeper. Specify which gatekeeper interface to use for Registration,
Admission, and Status (RAS) signaling. Force all intra-zone calls, in addition to calls that enter and leave
the zone, to use this gatekeeper.
Admission, and Status (RAS) signaling. Force all intra-zone calls, in addition to calls that enter and leave
the zone, to use this gatekeeper.
Router(config-gk)# zone local gk-zone-name domain-name ras-IP-address invia gk-zone-name
outvia
gk-zone-name enable-intrazone
Step 5
Define a technology prefix that matches what you configure for the H.323 endpoints in Cisco Unified
Communications Manager. The default-technology option specifies to use gateways registering with
this prefix option as the default for routing any addresses that are otherwise unresolved.
Communications Manager. The default-technology option specifies to use gateways registering with
this prefix option as the default for routing any addresses that are otherwise unresolved.
Router(config-gk)# gw-type-prefix type-prefix default-technology
Step 6
Disable proxy communications with local terminals for calls between local and remote zones.
Router(config-gk)# no use-proxy local-zone-name default inbound-to terminal
Router(config-gk)# no use-proxy local-zone-name default outbound-from terminal
Step 7
Enable the gatekeeper.
Router(config-gk)# no shutdown
Example
!
gatekeeper
zone local MP-Zone1 example.net 192.168.2.50 invia MP-Zone1 outvia MP-Zone1
enable-intrazone
gw-type-prefix 1#* default-technology
no use-proxy MP-Zone1 default inbound-to terminal
no use-proxy MP-Zone1 default outbound-from terminal
no shutdown
!
What To Do Next
Proceed to the
.