Cisco Cisco Unified MeetingPlace Video Integration 安装指南

Choose Device > Trunk from the Cisco Unified Communications Manager Administration menu bar. 

Click Add a New Trunk or Add New.

The exact text depends on the Cisco Unified Communications Manager version. 

For Trunk Type, choose H.225 (Gatekeeper Controlled). 

Click Next.

Enter options. (Scroll down to see all options.) 

Click Insert or Save.

The exact text depends on the Cisco Unified Communications Manager version. 

Click OK.

Click Reset Trunk or Reset. 

The exact text depends on the Cisco Unified Communications Manager version. 

From the Cisco Unified Communications Manager Administration menu bar, do one of the following:

In Cisco Unified Communications Manager 4.0, choose Route Plan > Route Pattern/Hunt Pilot.

In Cisco Unified Communications Manager 4.1, choose Route Plan > Route /Hunt > Route Pattern.

In Cisco Unified Communication Manager 5.x and 6.x, choose Route /Hunt > Route Pattern.

Click Add a New Route Pattern/Hunt Pilot or Add New. 

Device Name

A name that identifies this trunk.

Description 

A descriptive name for this trunk that connects to your IOS 
gatekeeper.

Retry Video Call as Audio

Check the check box.

Wait for Far End H.245 
Terminal Capability Set

Uncheck the check box.

Gatekeeper Name

Select the Cisco IOS Gatekeeper that you configured earlier in this 
process. 

Terminal Type

Gateway.

Technology Prefix

The prefix or pattern that will route calls to Cisco Unified 
Communications Manager from the gatekeeper. 

This value must match the default technology prefix specified in the 
IOS Gatekeeper.

Zone 

Enter the name of the local zone you specified in 

. This value is case-sensitive. 

Other parameters

Values as appropriate for your environment.