Cisco Cisco Digital Media Player 4300G 安装指南

Assess each location where you might want to use this equipment.

Nonoperating or storage

 percent

 percent

 percent

 percent

 percent

 percent

Operating, nonoperating, and storage

(0 m)

(4,200 m)

(0 m)

(4,200 m)

(0 m)

(4,200 m)

Install and use this equipment indoors — or outdoors in a covered area.

Never install or use it in a wet environment.

Never install or use it near radiators, open flames, or other heat sources.

There are — at most — only two supported methods to power this equipment.

Use the standard electrical power cord that came with the equipment. Cord length determines 
the maximum possible distance from the equipment to any AC electrical outlet that it can use. The 
outlet itself must use standard voltage for your locale, within the range from 100V to 240V. We 
recommend that you use a surge suppressor, line conditioner, or uninterruptable power supply 
(UPS). Please position all cables and power cords carefully. Route all cables, the power cord, and 
the plug so that they cannot be stepped on or tripped over. Never allow anything to rest on 
equipment cables or cords.

Use 802.3af power over Ethernet (PoE), assuming that your equipment model supports 
this feature. We describe PoE setup elsewhere in this guide. To learn if your equipment model 
supports this feature, see its datasheet at 

.