Cisco Cisco Videoscape Voyager Vantage 3.2 用户指南
189
Cisco Systems, Inc.
www.cisco.com
Post & Boot Diagnostics
Introduction
The Post & Boot diagnostic screens let you view the results of the self-test performed on each hardware component
within the set-top at the beginning of the boot process.
within the set-top at the beginning of the boot process.
Tasks that you can perform from this screen include the following:
Ensure that all hardware is present on the system.
Ensure that all hardware components are functioning properly.
Check the boot status of the set-top.
Determine if the set-top is ready to receive data.
Navigation
For instructions on navigating diagnostic screens, see
.
Post & Boot Result Screen
Note:
When a subscriber plugs the set-top into an AC power outlet, the set-top performs a self-test on each component
within the set-tpo. The POST results are not updated automatically. You must reboot the set-top to run another self-test.
Table 1
Post & Boot Result Screen
Field Name
Description
Possible Values
All fields in the Post Results section
(for example, UNcfg, BFS, SI, SAM,
IPG, and so on.)
(for example, UNcfg, BFS, SI, SAM,
IPG, and so on.)
Indicates the working status of each
component within the set-top.
component within the set-top.
Failed - Self-test failed; the
DHCT may be defective; contact
your system administrator for
assistance
DHCT may be defective; contact
your system administrator for
assistance
n/a - The DHCT does not use the
module tested in this field
module tested in this field
Passed - Component is installed
and functioning correctly
and functioning correctly
Unavailable - Component is not
installed (optional components)
or is not functioning correctly
installed (optional components)
or is not functioning correctly