Cisco Cisco StadiumVision Mobile Reporter 维护手册
© 2012 Cisco Systems, Inc. All rights reserved.
10
Acting Upon the Daily DMP Health Report
§
Non-compliant DMPs:
• If you know that you normally have a certain number of DMPs in non-compliant state, then
ignore this entry.
• If the number of non-compliant DMPs is not what you expect, investigate and correct the
issue(s).
§
If you see that an unusual number of DMPs have recently rebooted, investigate
further. This could be due to a power fluctuation issue in the edge switch, the edge
switch itself was rebooted, or another issue caused a break in power supply to the
affected DMPs.
further. This could be due to a power fluctuation issue in the edge switch, the edge
switch itself was rebooted, or another issue caused a break in power supply to the
affected DMPs.
§
What really counts is the ‘Devices in critical state’ and ‘Devices not reachable’
entries!
entries!
• These reported numbers are typically equal, but not necessarily so. For example, Flash
Template corruption or missing Flash Template will show up as “critical” but not
“unreachable”.
“unreachable”.
• Investigate the affected DMPs and replace if necessary!
• Do not simply ignore these DMPs as 99.99% of the time their TV screens will be all black!
§
It is recommended that you inform your Event Manager (EM) about these DMPs
and resolve all DMPs to green state, replacing any DMPs as necessary.
and resolve all DMPs to green state, replacing any DMPs as necessary.