Cisco Headend System Release 2.7 安装指南
Chapter 3 SR 2.7/3.7/4.2 SP3 Installation Procedures
60
4023737 Rev C
Install the Service Pack
Note: If you have correctly followed all instructions to this point, you should still be
logged on as root user in an xterm window on the DNCS.
1 Insert the DBDS Service Pack CD into the CD drive of the DNCS. The system
logged on as root user in an xterm window on the DNCS.
1 Insert the DBDS Service Pack CD into the CD drive of the DNCS. The system
automatically mounts the CD within 30 seconds.
2 Is the File Manager window open?
If yes, select File and choose Close, then go to step 3.
If no, go to step 3.
3 Type df -n and then press Enter. A list of the mounted file systems appears.
Note: The presence of /cdrom in the output confirms that the system correctly
mounted the CD.
mounted the CD.
4 Important: Be sure to include -i (lower case letter "i") in the following command.
Type /cdrom/cdrom0/install_SP -i and then press Enter. A list of packages
displays.
Note: In the following example, the error shown in the output is only output to
the screen. This error is not logged to the /dvs/install_SP.log file. All that is
logged is the package name.
Example - Sample Packages List:
displays.
Note: In the following example, the error shown in the output is only output to
the screen. This error is not logged to the /dvs/install_SP.log file. All that is
logged is the package name.
Example - Sample Packages List:
Checking the system, please wait...
Checking for running processes...
*************************************************************************
This script will install the following packages on:
DNCS Server (conanv880)
------------------------
SAItools DNCS/AppServer Tools 03-13-2007
4.2.0.13p2
SAIdncs DNCS 12-01-09
4.2.0.50p3
SAIgui DNCS GUI 12-01-09
4.2.0.50
SAIwebui DNCS WEBUI 12-01-09
4.2.0.50
SAIqam QAM Modulator
V2.5.7
SAImqam MQAM Modulator
V2.6.19
SAIgqam GQAM Modulator
V4.2.2