Cisco Cisco IOS Software Release 12.2(14)SX
Americas Headquarters:
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
© 2007 Cisco Systems, Inc. All rights reserved.
Netflow Subinterface Support
The NetFlow Subinterface Support feature provides the ability to enable NetFlow on a per-subinterface
basis. In a scenario in which your network contains thousands of subinterfaces and you want to collect
export records from only a few subinterfaces, you can fine-tune your collection of data to only specified
subinterfaces. The result is lower bandwidth requirements for NetFlow Data Export (NDE) and reduced
platform requirements for NetFlow data-collection devices.
basis. In a scenario in which your network contains thousands of subinterfaces and you want to collect
export records from only a few subinterfaces, you can fine-tune your collection of data to only specified
subinterfaces. The result is lower bandwidth requirements for NetFlow Data Export (NDE) and reduced
platform requirements for NetFlow data-collection devices.
Configuration Information
Configuration information is included in the “Configuring NetFlow and NetFlow Data Export” module
of the
of the
, Release 12.4, at the following URL:
The following sections provide information about this feature:
•
NetFlow Subinterface Support Benefits: Fine-Tuning Your Data Collection
•
Configuring NetFlow Subinterface Support: Example
For a complete list of features included in the “Configuring NetFlow and NetFlow Data Export” module,
see the Feature Information Table located toward the end of the module.
see the Feature Information Table located toward the end of the module.
Command Reference Information
Release 12.2(33)SXH
There are no new or modified commands for this feature.
Master Command Lists
Cisco IOS master commands lists provide an alphabetical list of all Cisco IOS commands in a Cisco IOS
release.
release.