Cisco Cisco IOS Software Releases 12.2 MC 發佈版本通知

Release Notes for Cisco MWR 1941-DC Mobile Wireless Edge Router for Cisco IOS Release 12.2(15)MC2

OL-13984-06

System Configuration Requirements

Note

In the event of a power outage, the ROM monitor download will not be successful.

Note

Command output is similar to the following.

To upgrade the ROMMON version on your Cisco MWR 1941-DC router, complete these steps from
EXEC mode:

Step 1

Copy the new ROMMON image from a TFTP server to slot0.

Step 2

Verify that the new image has been copied:

Router#dir slot0:

Directory of slot0:/

3 -rw- 871 Mar 01 1993 00:05:02 MWR1900-3-default.cfg

4 -rw- 610704 Mar 01 1993 00:10:30 MWR1900_RM2.srec.122-8r.MC3

Step 3

Upgrade the current configuration by entering the upgrade rom-monitor command as shown in the
following example:

Router# upgrade rom-monitor file slot0:MWR1900_RM2.srec.122-8r.MC3

This command will reload the router. Continue? [yes/no]:y

Step 4

Press Enter to continue. The router begins downloading the ROMMON image. The router
automatically reboots.

ROMMON image upgrade in progress

Erasing boot flash

eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

Programming boot flash pppp

Now Reloading

System Bootstrap, Version 12.2(20010915:181836) DEVELOPMENT SOFTWARE

Running new upgrade for first time

System Bootstrap, Version 12.2(8r)MC3, RELEASE SOFTWARE (fc1)

TAC Support:http://www.cisco.com/tac

mwr1900 processor with 131072 Kbytes of main memory

Main memory is configured to 64 bit mode with parity disabled

Upgrade ROMMON initialized

rommon 1 >