Cisco Cisco Web Security Appliance S370 安装指南

You can manage the web security appliance 
from the management port (Management 
port) by entering 
http://192.168.42.42:8080

 

or using the IP address assigned to the 
management interface after you have 
completed the System Setup Wizard. 

If you reset your configuration to factory 
default settings (for example, by re-running 
the System Setup Wizard), you can access 
the management interface only from the 
Management port 
(http://192.168.42.42:8080), so ensure you 
have a connection to the Management port.

Also, verify that you open firewall ports 80 
and 443 on your management interface.

After running the System Setup Wizard, at 
least one port on the appliance is configured 
to receive web traffic from the clients on the 
network: M1 only; M1 and P1; 

 

M1, P1 and P2; P1 only; or P1 and P2.

If you configured the web proxy in 
explicit forward mode, the 
applications on the client machines 
must be configured to explicitly 
forward web traffic to the web 
security appliance’s web proxy 
using the IP address configured for 
data, either M1 or P1.