Cisco Cisco DWDM Transceiver Modules 数据表
© 2016 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 1 of 4
Data Sheet
Cisco 100GBASE CFP Modules
Product Overview
The Cisco
®
100GBASE CFP modules offer customers 100 Gigabit Ethernet connectivity options for data center
networking, enterprise core aggregation, and service provider transport applications.
Features and Benefits
Main features of Cisco 100GBASE CFP modules include:
●
Supports 100GBASE Ethernet
●
Hot-swappable input-output device that plugs into an Ethernet CFP port of a Cisco switch or router
●
Provides flexibility of interface choice
●
Supports “pay-as-you-populate” model
●
Supports digital optical monitoring (DOM)
●
Supports the Cisco quality identification (ID) feature that enables a Cisco switch to identify whether the
module is certified and tested by Cisco
Cisco CFP-100G-LR4
The Cisco 100GBASE-LR4 (Figure 1) CFP module supports a link length of 10 kilometers on standard single-mode
fiber (SMF, G.652). 100 Gigabit Ethernet signal is carried over four wavelengths. Multiplexing and demultiplexing of
the four wavelengths are managed within the device.
Figure 1. Cisco 100G-LR4 CFP Module
Cisco CFP-100G-SR10
The Cisco 100GBASE-SR10 (Figure 2) CFP module supports link lengths of 100 meters and 150 meters
respectively on laser-optimized OM3 and OM4 multifiber cables. It primarily enables high-bandwidth 100-gigabit
links over 24-fiber ribbon cables terminated with MPO/MTP-24 connectors. It can also be used in 10 x 10 Gigabit
Ethernet mode along with ribbon to duplex fiber breakout cables for connectivity to ten 10GBASE-SR optical
interfaces. Maximum channel insertion loss allowed is respectively 1.9 dB over 100m of OM3 cable or 1.5 dB over
150m of OM4 cable.