Cisco Cisco DWDM Transceiver Modules 数据表
© 2016 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 2 of 14
Product
Type
Connector Type
QSFP-H40G-CU (0.5M,1M,2M, 3M,4M, 5M)
QSFP to QSFP copper direct-attach cables
QSFP-H40G-ACU (7M, 10M)
QSFP-4X10G-AOC (1M, 2M, 3M, 5M, 7M, 10M)
QSFP to four SFP+ active optical breakout cables
QSFP-H40G-AOC (1M, 2M, 3M, 5M, 7M, 10M, 15M,
20M)
20M)
QSFP to QSFP active optical cables
CVR-QSFP-SFP10G
QSFP 40G to SFP+ 10G adapter
Cisco QSFP-40G-SR4-S (S-Class)
The Cisco 40GBASE-SR4 QSFP module supports link lengths of 100 and 150 meters, respectively, on laser-
optimized OM3 and OM4 multimode fibers. It primarily enables high-bandwidth 40G optical links over 12-fiber
parallel fiber terminated with MPO/MTP multifiber female connectors. Cisco QSFP-40G-SR4-S is optimized to
guarantee interoperability with any IEEE-compliant 40GBase-SR4 module. QSFP-40G-SR4-S does not support
FCoE.
Cisco QSFP-40G-LR4-S (S-Class)
The Cisco 40GBASE-LR4 QSFP module supports link lengths of up to 10 kilometer over a standard pair of G.652
single-mode fiber with duplex LC connectors. The QSFP-40G-LR4-S module supports 40GBase Ethernet rate only.
The 40 Gigabit Ethernet signal is carried over four wavelengths. Multiplexing and demultiplexing of the four
wavelengths are managed in the device. QSFP-40G-LR4-S does not support FCoE.
Cisco QSFP 40G BiDi
The Cisco QSFP 40-Gbps bidirectional (BiDi) transceiver (Figure 1) is a pluggable optical transceiver with a duplex
LC connector interface for short-reach data communication and interconnect applications using multimode fiber
(MMF). The Cisco QSFP 40-Gbps BiDi transceiver offers customers a compelling solution that enables reuse of
their existing 10 gigabit duplex MMF infrastructure for migration to 40 Gigabit Ethernet connectivity.
The Cisco QSFP 40-Gbps BiDi transceiver supports link lengths of 100 and 150 meters on laser-optimized OM3
and OM4 multimode fibers, respectively.
The Cisco BiDi transceiver complies with the QSFP MSA specification, enabling customers to use it on all QSFP
40-Gbps platforms to achieve high-density 40 Gigabit Ethernet networks.
Each Cisco QSFP 40-Gbps BiDi transceiver consists of two 20-Gbps transmit and receive channels in the 832-918
nanometer wavelength range, enabling an aggregated 40-Gbps link over a two-strand multimode fiber connection.
Figure 1. Cisco QSFP BiDi 40Gbps Transceiver: Duplex MMF with LC Connectors at Both Ends