Cisco Cisco UCS C22 M3 Rack Server 数据表

Interfaces 

Rear panel

■

One RJ-45 10/100/1000 Ethernet management port, using Cisco 

Integrated Management Controller (CIMC) firmware

■

Four 1-GbE (10/100/1000 Mbps capable) LOM ports

■

One RJ45 serial port connector

■

Two USB 2.0 port connectors

■

One DB15 VGA connector

■

Various PCIe card ports (dependent on which cards are installed)

• Converged Network Adapter (CNA) ports
• Network Interface Card (NIC) ports
• Host Bus Adapter (HBA) ports

Front panel

■

One KVM console connector (supplies two USB 2.0, one VGA, and one 

serial connector)

WoL

The 1-Gb Base-T Ethernet LAN ports support the wake-on-LAN (WoL) 
standard.

InfiniBand

The bus slots in this server support the InfiniBand architecture.

Front Panel

A front panel controller provides status indications and control buttons

Power subsystem 

Two power supplies are required (either 650 W AC or 1200 W AC or 930 W 

DC). 

 

Redundant as 1 + 1.

ACPI

This server supports the advanced configuration and power interface (ACPI) 

4.0 standard.

Fans 

Chassis:

■

Six hot-swappable fans for front-to-rear cooling.

Power supply:

■

Each power supply is equipped with a fan.

Integrated management 

processor 

BMC running Cisco Integrated Management Controller (CIMC) firmware.
Depending on your CIMC settings, the CIMC can be accessed through the 

1-GbE dedicated management port, the 1-GbE LOM ports, or a Cisco virtual 

interface card (VIC).