Cisco Cisco 100 Gigabit Modules 安装指南

Ultimate disposal of this product should be handled according to all national laws and regulations. 
Statement 1040

Use of controls, adjustments, or performing procedures other than those specified may result in 
hazardous radiation exposure. Statement 1057

You will need these tools to install the CFP transceiver module: 

Small flat-blade screwdriver for removing the CFP transceiver socket cover. 

Wrist strap or other personal grounding device to prevent electro-static discharge (ESD) 
occurrences. 

Fiber-optic end-face cleaning tools and inspection equipment. For complete information on 
inspecting and cleaning fiber-optic connections, refer to the white paper at this URL: 

The CFP transceiver is a static-sensitive device. Always use an ESD wrist strap or similar individual 
grounding device when handling the CFP transceivers or coming into contact with the modules. 

To install a CFP transceiver, follow these steps: 

Remove the CFP transceiver from its protective packaging. 

Check the label on the CFP transceiver body to verify that you have the correct model for your network.

Remove the dust plug from the CFP transceiver module optical port and set it aside.

Align the CFP device into the transceiver port socket of your networking module, and slide it in until the 
CFP transceiver EMI gasket flange makes contact with the module faceplate. (See