Dialogic D600JCT2E175W 881-779 数据表

产品代码
881-779
下载
页码 10
Datasheet
Dialogic
®
JCT Media Boards
8
Springware/JCT Technical Specifications 
(cont.)
MF Signaling (T-1) 
R1
MF digits
0 to 9, KP, ST, ST1, ST2, ST3 per Telcordia LSSGR Sec 6, TR-NWT-000506 and ITU-T Q.321
Transmit level
Complies with Telcordia LSSGR Sec 6, TR-NWT-000506
Signaling mechanism
Complies with Telcordia LSSGR Sec 6, TR-NWT-000506
Dynamic range for detection
–25 dBm0 to –3 dBm0 per tone
Acceptable twist
6 dB
Acceptable frequency variation
Less than ±1 Hz
MF Signaling (E-1) 
R2
MF digits
All 15 forward and backward signal tones per ITU-T Q.441
Transmit level
–8 dBm0 per tone, nominal, per ITU-T Q.454; programmable
Signaling mechanism
Supports the R2 compelled signaling cycle and non-compelled pulse requirements per 
ITU-T Q.457 and Q.442
Dynamic range for detection
–35 dBm0 to –5 dBm0 per tone
Acceptable twist
6 dB
Acceptable frequency variation
Less than ±1 Hz
Call Progress Analysis
Busy tone detection
Default setting designed to detect 74 out of 76 unique busy/congestion tones used in 97 countries
as specified by ITU-T Rec. E., Suppl. #2 
Default uses both frequency and cadence detection 
Application can select frequency only for faster detection in specific environments
Ring back detection
Default setting designed to detect 83 out of 87 unique ring back tones used in 96 countries as
specified by ITU-T Rec. E., Suppl. #2 
Uses both frequency and cadence detection
Positive voice detection
Standard
Positive voice detection speed
Detects voice in as little as 1/10th of a second
Positive answering machine detection
Standard
Fax/modem detection
Preprogrammed
Intercept detection
Detects entire sequence of the North American tri-tone
Other intercept tone sequences can be programmed
Dial tone detection
Application enable/disable
Supports up to three different user-definable before dialing dial tones
Programmable dial tone dropout debouncing
Tone Dialing
DTMF digits
0 to 9, *, #, A, B, C, D per Telcordia LSSGR Sec 6, TR-NWT-000506
Frequency variation
Less than ±1 Hz
Rate
10 digits/s, configurable by parameter**
Level
–7.5 dBm0 per tone, nominal, configurable by parameter**
Pulse Dialing
10 digits
0 to 9
Pulsing rate
10 pulses/s, nominal, configurable by parameter**
Break ratio
60% nominal, configurable by parameter**
Analog Display Services Interface (ADSI)
FSK generation per Telcordia TR-NWT-000030
CAS tone generation and DTMF detection per Telcordia TR-NWT-001273