Cisco Cisco TelePresence MX700 维护手册
D15331.02 MX700 and MX800 Administrator Guide CE8.1, APRIL 2016.
www.cisco.com — Copyright © 2016 Cisco Systems, Inc. All rights reserved.
167
Cisco TelePresence MX700 and MX800
Administrator Guide
Control a local camera
Sign in to the web interface and navigate to
Call Control
.
Prerequisites
• The
Video > Input > Connector n > CameraControl >
Mode
setting is switched
On .
• The camera has pan, tilt or zoom functionality.
Move the camera using the pan/tilt/zoom controls
1. Choose which camera to control in the Main Source drop
down list.
2. Click the camera icon to open the camera control
window.
Video snapshots from the room are only displayed for
Video snapshots from the room are only displayed for
video systems that have the Remote Monitoring option.
3. Use the left and right arrows to pan the camera; the up
and down arrows to tilt it; and
+
and
-
to zoom in and out.
Only relevant controls appear in the window.
Move the camera to a preset position
1. Choose which camera to control in the Main Source
drop down list.
2. Click
Presets...
to open a list of available presets.
If no presets are defined, the button is disabled and
named No presets.
3. Click a preset’s name to move the camera to the preset
position.
4. Click
OK
to close the window.
You cannot use the web interface to define a preset;
you should use the Touch controller.
Main Source drop down list
Choose which camera to control from
the drop down list.
Automatically refresh snapshots
Snapshot area
Shows snapshots of the selected main input source.
Only available on video systems that have the
Remote Monitoring option.
Introduction
Configuration
Peripherals
Maintenance
System settings
Appendices
Appendices