Cisco Cisco TelePresence MX700 维护手册
D15331.02 MX700 and MX800 Administrator Guide CE8.1, APRIL 2016.
www.cisco.com — Copyright © 2016 Cisco Systems, Inc. All rights reserved.
54
Cisco TelePresence MX700 and MX800
Administrator Guide
Connect a camera
Typically, an external camera is
connected to an HDMI input.
In addition, you must connect the
camera via an Ethernet switch to the
video system’s Ethernet 2 or Ethernet 3
port; or to the camera control DSUB-9
port. The type of camera determines
whether to use Ethernet or DSUB-9.
Connect a computer
Connect a computer to a video input in
order to share content locally or with
conference participants. The codec
supports two computers simultaneously.
Typically, computers are connected to
Connector 3 (HDMI) or Connector 4
(DVI-I).
To get audio when using DVI-I, you must
also connect the computer to one of the
codec’s Audio Line inputs (Euroblock).
Analog video input
Connector 5 comprises two BNC
sockets, and is used for S-Video or
Composite video signals.
S-Video: Connect to both the Y and C
connectors.
Composite: Connect to the Y connector.
About the video inputs
MX700 and MX800 has several input
connectors. The following inputs are
available for additional content sources:
• Two HDMI inputs (video systems with
a single camera) / One HDMI input
(video systems with a dual camera)
• One DVI-I input
• One combined S-video/Composite
• One combined S-video/Composite
video input
The DVI-I and combined S-Video/
Composite video inputs cannot be used
simultaneously.
Typically, the inputs are used for
computers, but you can also connect
cameras or other types of video and
content sources.
You can connect several
external input sources
to the video system
simultaneously:
• Three for single
camera systems
• Two for dual camera
systems
Sign in to the web
interface and navigate to
Setup > Configuration
, to
find the settings referred
in this section.
Remove the video
system’s left side cover
to get access to the
connectors. The cover is
fastened with magnets.
Connector 4 (DVI-I)
Do not disconnect!
Used for the integrated
camera in a single
camera system.
Do not disconnect!
Used for the integrated
cameras in a dual
camera system.
Connector 3 (HDMI)
Connector 2 (HDMI)
Connector 1 (HDMI)
Audio Line input
(Euroblock, 3.5 mm)
Connector 5
(S-Video/Composite)
Y
C
Connect input sources
(page 1 of 2)
Introduction
Configuration
Peripherals
Maintenance
System settings
Appendices
Peripherals