Cisco Cisco TelePresence MX700 维护手册
D14850.07 MX Series Administrator Guide TC6.3, OCTOBER 2013.
www.cisco.com — Copyright © 2011–2013 Cisco Systems, Inc. All rights reserved.
6
Cisco TelePresence MX Series
Administrator Guide
New features and improvements
Support for CUCM Extension Mobility
The Extension Mobility feature allows you to log in to a
The Extension Mobility feature allows you to log in to a
TelePresence endpoint with your personal credentials. It is
well suited for endpoints that will be used by several users.
The feature is fully managed from CUCM (Cisco Unified
Communication Manager), and no further configuration is
required on the endpoint.
When a user logs in, the endpoint adopts the individual user’s
default device profile information, including line numbers,
speed dials, services links, and other user-specific properties
of an endpoint. When another user logs in, the settings and
properties change to match the new user.
For details on how to setup Extension Mobility, please refer
to the Features and Services guide for CUCM at
Support for non-persistent mode
As a general rule, we recommend not to change the default
As a general rule, we recommend not to change the default
settings for persistency. This means that configurations, call
history, internal logs, local phonebook / favorites list and IP
connectivity information are stored, and a system restart
does not delete the information.
In the case were a new user is not supposed to see or trace
back to any kind of logged information from the previous
session, non-persistent mode may be switched on. In this
mode the configurations etc. are stored only in RAM, and will
be wiped at every shutdown. The persistency settings can
be configured from the
Configuration > Security
page on the
web interface.
Support for new languages on Touch 8
The following new languages are supported on Touch 8:
The following new languages are supported on Touch 8:
Arabic and Hebrew.
ICE support on Active control
Active Control (introduced in TC6.2) now has ICE support
Active Control (introduced in TC6.2) now has ICE support
(Interactive Connectivity Establishment, RFC 5245) when
registered to a VCS. This means that ICE and Active Control
can be used at the same time in this case.
Improved quality for presentation sources
An input source is fed directly to the encoder. The resolution
An input source is fed directly to the encoder. The resolution
is not changed as long as it does not exceed the endpoint’s
maximum supported resolution and there are no bandwidth
restrictions. If the image must be resized to fit a recipient’s
screen, the scaling is performed after decoding on the far
end.
This leads to improved quality for presentation sources that
have other resolutions than the traditional video resolutions.
Call History available in the web interface
The Call History list is available in the web interface (choose
The Call History list is available in the web interface (choose
Call Control > Call History
in the navigation bar ). You can use
the web interface to delete entries or clear the complete list.
You can download the Call History in an archive together with
the log files if you choose
Diagnostics > Log Files
in the web
interface navigation bar.
Extended logging mode for troubleshooting
You can switch on extended logging from the web interface.
You can switch on extended logging from the web interface.
Extended logging may help diagnose network issues and
problems during call setup.
Extended logging uses more of your video system’s
resources, and may cause the system to underperform.
Therefore extended logging should be enabled just to
reproduce an issue, and then disabled.
What’s new in this version
This section provides an overview of the new and changed
system settings and new features in the TC6.3 software
version.
Software release notes
For a complete overview of the news and changes, we
recommend reading the Software Release Notes (TC6).
Go to:
Software download
For software download go to:
Contents
Introduction
System settings
Setting passwords
Appendices
Web interface
Introduction