Cisco Cisco Cius Wi-Fi 设计指南
Cisco Cius Wireless Deployment Guide
73
In later versions of the Cisco Unified Wireless LAN Controller it does not allow both TPC (Power Constraint) and DTPC
(Dynamic Transmit Power Control) to be enabled simultaneously.
Channel Announcement and Channel Quiet Mode should be enabled.
(Dynamic Transmit Power Control) to be enabled simultaneously.
Channel Announcement and Channel Quiet Mode should be enabled.
High Throughput (802.11n)
The 802.11n data rates can be configured per radio (2.4 GHz and 5 GHz).
Ensure that WMM is enabled and WPA2(AES) is configured in order to utilize 802.11n data rates.
Cisco Cius supports MCS 0 - MCS 7 data rates only, but MCS 8 - MCS 15 can optionally be enabled if there are other 802.11n
clients utilizing the same band frequency that include MIMO antenna technology, which can take advantage of the those higher
data rates.
It is recommended to disable MCS 0.
Ensure that WMM is enabled and WPA2(AES) is configured in order to utilize 802.11n data rates.
Cisco Cius supports MCS 0 - MCS 7 data rates only, but MCS 8 - MCS 15 can optionally be enabled if there are other 802.11n
clients utilizing the same band frequency that include MIMO antenna technology, which can take advantage of the those higher
data rates.
It is recommended to disable MCS 0.