Cisco Cisco Firepower Management Center 2000 發佈版本通知

1

      www.cisco.com

FireSIGHT System Release Notes

Version 5.4.0.3 and Version 5.4.1.2
First Published: July 21, 2015
Last Updated: November 23, 2016

Even if you are familiar with the update process, make sure you thoroughly read and understand these release notes, 
which describe supported platforms, new and changed features and functionality, known and resolved issues, and 
product and web browser compatibility. They also contain detailed information on prerequisites, warnings, and specific 
installation instructions for the following appliances:



Series 3 Defense Centers (the DC750, DC1500, DC2000, DC3500, and the DC4000)



Series 2 and Series 3 managed devices (the 3D500, 3D6500, 3D1000, 3D2000, 3D2100, 3D2500, 3D3500, 
3D4500, 3D7010, 3D7020, 3D7030, 3D7050, 3D7110, 3D7115, 3D7120, 3D7125, 3D8120, 3D8130, 3D8140, 
3D8250, 3D8260, 3D8270, 3D8290, 3D8350, 3D8360, 3D8370, 3D8390, AMP7150, AMP8050, AMP8150, 
AMP8350, AMP8360, AMP8370, and the AMP8390)



Cisco ASA with FirePOWER Services (the ASA5506-X, ASA5506H-X, ASA5506W-X, ASA5508-X, ASA5512-X, 
ASA5515-X, ASA5516-X, ASA5525-X, ASA5545-X, ASA5555-X, ASA5585-X-SSP-10, ASA5585-X-SSP-20, 
ASA5585-X-SSP-40, ASA5585-X-SSP-60, and the ISA 3000)



Cisco NGIPS for Blue Coat X-Series



64-bit virtual Defense Centers

This update is not supported on virtual managed devices or Cisco NGIPS for Blue Coat X-Series.

 For detailed information on the FireSIGHT System, refer to the online help or download the FireSIGHT System User 

Guide from the Support site.

These release notes are valid for Version 5.4.0.3 and Version 5.4.1.2 of the FireSIGHT System. You can update physical 
to Version 5.4.0.3. You can update Cisco ASA FirePOWER modules, physical Defense Center, and virtual Defense 
Centers to Version 5.4.1.2. Note that you can update appliances in the following manner:



Physical and virtual Defense Centers (the DC750, DC1500, DC2000, DC3500, and the DC4000) must be running 
Version 5.4 to update to Version 5.4.1.2. If your Defense Center is running an earlier version, you must update to 
Version 5.4 before updating to Version 5.4.1.2. 

A Defense Center may update its devices while running Version 5.4.1.1, but you will be unable to decrypt or 

inspect SSL traffic if your Defense Center remains at Version 5.4. If you plan on decrypting or inspecting SSL traffic, 
update your Defense Center to Version 5.4.1.2.

: You can update devices to Version 5.4.0.3 or Version 5.4.1.2 using a Defense Center running at least 

Version 5.4. However, if you plan on decrypting and inspecting SSL traffic, update your Defense Center to at least 
Version 5.4.1 prior to updating your devices.



Series 2 devices (the 3D500, 3D1000, 3D2000, 3D2100, 3D2500, 3D3500, 3D4500, and the 3D6500) must be 
running Version 5.4 to update to Version 5.4.0.3. If your Series 2 device is running an earlier version, you must update 
to Version 5.4 before updating to Version 5.4.0.3.