Cisco Cisco Firepower Management Center 2000 發佈版本通知

FireSIGHT System Release Notes

Installing the Update

for Series 2 managed devices:

Sourcefire_3D_Device_

Upgrade

-

5.4.0.4

-

55

.sh

for Series 3 managed devices:

Sourcefire_3D_Device_S3_Upgrade-5.4.0.4-55.sh

for virtual managed devices:

Sourcefire_3D_Device_Virtual64_VMware_Upgrade-5.4.0.4-55.sh

for Cisco NGIPS for Blue Coat X-Series devices:

Sourcefire_3D_XOS_Device_Upgrade-5.4.0.4-55.sh

for ASA FirePOWER modules (555X-X-SSP-X and 558X-X-SSP-X):

Cisco_Network_Sensor_Upgrade-5.4.0.4-55.sh

for ASA FirePOWER modules (ASA5506-X, ASA5506W-X, ASA5506H-X, 5508-X, and ASA5516-X, and the 
ISA 3000):

Cisco_Network_Sensor_Upgrade-5.4.1.3-26.sh

Upload the update to the Defense Center by selecting System > Updates, then clicking Upload Update on the 
Product Updates tab. Browse to the update and click Upload.

The update is uploaded to the Defense Center. The web interface shows the type of update you uploaded, its version 
number, and the date and time it was generated. The page also indicates whether a reboot is required as part of the 
update.

Make sure that the appliances in your deployment are successfully communicating and that there are no issues 
reported by the health monitor.

Click the install icon next to the update you are installing.

Select the devices where you want to install the update.

If you are updating a stacked pair, selecting one member of the pair automatically selects the other. You must update 
members of a stacked pair together.

Click Install. Confirm that you want to install the update and reboot the devices.

The update process begins. You can monitor the update's progress in the Defense Center’s task queue (System > 
Monitoring > Task Status).

Note that managed devices may reboot twice during the update; this is expected behavior. Traffic is interrupted while 
VAPs reload on Cisco NGIPS for Blue Coat X-Series devices deployed inline.

When updating your X-Series device, you must wait for the device to reboot and completely reload the VAP 

before continuing. 

 If you encounter issues with the update (for example, if the task queue indicates that the update has failed 

or if a manual refresh of the task queue shows no progress for several minutes), do not restart the update. Instead, 
contact Support.

Select Devices > Device Management and confirm that the devices you updated have the correct software version: 
Version 5.4.0.4.