Cisco Cisco MDS 9000 SAN-OS Software Release 1.0 發佈版本通知

This sections lists limitations or restrictions associated with this release. 

Starting with Cisco MDS SAN-OS Release 3.0(1), the SSM front panel ports can no longer be 
configured in auto mode. Because auto mode is the default for releases prior to Release 3.0(1), you 
should modify the configuration of the ports before upgrading the SAN-OS software image to NX-OS 
Release 4.2(1b) to avoid any traffic disruption. 

For information on how to reconfigure the SSM ports, refer to the “Reconfiguring SSM Ports Before 
Upgrading to NX-OS Release 4.2(1b)” section of the 

Before upgrading your SSI image, refer to the

 and to Table 11 in the 

. Use Table 11 to determine your nondisruptive upgrade path to Cisco MDS NX-OS 

Release 4.2(1b).

There are no caveats associated with Cisco MDS SSI Release 4.2(1b).

The documentation set for NX-OS for the Cisco MDS 9000 Family includes the following documents. 
To find a document online, access the following web site:

The documentation set for Cisco Fabric Manager appears in the Cisco Fabric Manager Release Notes 
for Release 4.2(1b), which is available from the following website: