Cisco Cisco IOS Software Release 12.0(30)S 白皮書
Corporate Headquarters:
Copyright © 2004 Cisco Systems, Inc. All rights reserved.
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Maximum Mask Aggregate Output NetFlow
The Maximum Mask Aggregate Output NetFlow feature is an extension of NetFlow accounting that
allows you to capture Internet Protocol (IP) flow information on Cisco 12000 series IP services engine
(ISE) line cards by specifying a maximum source prefix or destination prefix mask that filters flows for
the Prefix-Type of Service (ToS) aggregation scheme. NetFlow data is collected on output flows for
packets that arrive on a provider edge (PE) router in either Multiprotocol Label Switching (MPLS) or IP
format and are transmitted on an egress ISE interface in IP format to a customer edge (CE) device.
allows you to capture Internet Protocol (IP) flow information on Cisco 12000 series IP services engine
(ISE) line cards by specifying a maximum source prefix or destination prefix mask that filters flows for
the Prefix-Type of Service (ToS) aggregation scheme. NetFlow data is collected on output flows for
packets that arrive on a provider edge (PE) router in either Multiprotocol Label Switching (MPLS) or IP
format and are transmitted on an egress ISE interface in IP format to a customer edge (CE) device.
Feature History for Maximum Mask Aggregate Output NetFlow
Finding Support Information for Platforms and Cisco IOS Software Images
Use Cisco Feature Navigator to find information about platform support and Cisco IOS software image
support. Access Cisco Feature Navigator at
support. Access Cisco Feature Navigator at
. You must have an account on
Cisco.com. If you do not have an account or have forgotten your username or password, click Cancel at
the login dialog box and follow the instructions that appear.
the login dialog box and follow the instructions that appear.
Contents
•
•
•
•
•
•
•
•
Release
Modification
12.0(30)S
This feature was introduced.