Cisco Cisco MDS 9000 NX-OS Software Release 6.2 發佈版本通知
Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 6.2(9)
OL-29201-04
New Software Features in Cisco NX-OS Release 6.2(1)
New Software Features in Cisco NX-OS Release 6.2(1)
This section briefly describes the new software features introduced in Cisco NX-OS Release 6.2(1).
•
Generic Online Diagnostics
Starting with Cisco NX-OS Release 6.2(1), the Cisco MDS 9000 Family supports the generic online diagnostics (GOLD)
feature. With online diagnostics, you can test and verify the hardware functionality of a device while the device is
connected to a live network. In particular, the online diagnostics help you verify that hardware and internal data paths are
operating as designed so that you can rapidly isolate faults.
feature. With online diagnostics, you can test and verify the hardware functionality of a device while the device is
connected to a live network. In particular, the online diagnostics help you verify that hardware and internal data paths are
operating as designed so that you can rapidly isolate faults.
For more information about this feature, see the Cisco MDS 9000 System Management Configuration Guide at this URL:
•
Enhancement to map LDAP/AD users to Cisco NX-OS roles and allow both local and remote users to use SSH or Telnet.
For more information about this feature, see the Cisco MDS 9000 Security Configuration Guide, at this URL:
•
Command-line interface (CLI) command changes, including the following:
–
Enhance the clear snmp counters command.
–
Display ISL related information.
–
Display a warning messages for a shared port interface when you bring down the port.
–
Display throughput information for all ports on a line card or ISL or on a switch or chassis.
–
Provide an estimated time for DMM job completion.
–
Shorten the show dmm job job-id 50571379 session session_id (1-20) command to show dmm job-id 50571379
session_id 1
session_id 1
Information about the modified CLI commands can be found in the Cisco MDS 9000 Command Reference at this URL:
Licensed Cisco NX-OS Software Packages
Most Cisco MDS 9000 family software features are included in the standard package. However, some features are logically
grouped into add-on packages that must be licensed separately, such as the Cisco MDS 9000 Enterprise package, SAN
Extension over IP package, Mainframe package, and Data Mobility Manager package. On-demand ports activation licenses are
also available for the Cisco MDS 9250i Multiservice Fabric Switch, Cisco MDS 9148 48-Port Multilayer Fabric Switch, Cisco
MDS 9148S 48-Port Multilayer Fabric Switch, and the Cisco MDS 8-Gb Fabric Switch for HP c-Class Blade System.
grouped into add-on packages that must be licensed separately, such as the Cisco MDS 9000 Enterprise package, SAN
Extension over IP package, Mainframe package, and Data Mobility Manager package. On-demand ports activation licenses are
also available for the Cisco MDS 9250i Multiservice Fabric Switch, Cisco MDS 9148 48-Port Multilayer Fabric Switch, Cisco
MDS 9148S 48-Port Multilayer Fabric Switch, and the Cisco MDS 8-Gb Fabric Switch for HP c-Class Blade System.
Note
A license is not required to use the Cisco MDS 9000 8-port 10-Gbps Fibre Channel over Ethernet (FCoE)
module (DS-X9708-K9) and the Cisco MDS 48-Port 10- Gigabit Fibre Channel over Ethernet Module
(DS-X9848-480K9).
module (DS-X9708-K9) and the Cisco MDS 48-Port 10- Gigabit Fibre Channel over Ethernet Module
(DS-X9848-480K9).
Additional information about licensed Cisco NX-OS software packages is available at this URL:
http://www.cisco.com/c/en/us/products/storage-networking/mds-9000-software-licensing/datasheet-listing.html