Cisco Cisco IOS Software Release 12.3(4)T

rollover * 2

32

 + value

In the following example, rollover is 3 and value is 151 (3 * 2

32

 + 151 = 12884902039):

Control-Info = "I3;151"

The Octets Input attribute is used only for accounting purposes and does not appear in profiles.

To monitor and maintain SSG, use the following commands in privileged EXEC mode:

Router# show ssg connection ip-address service-name

Displays the connections of a given host and service name.

Router# clear ssg connection ip-address service-name

Removes the connections of a given host and service name.

Router# show ssg pass-through-filter

Displays the downloaded filter for transparent pass-through.

Router# clear ssg pass-through-filter

Removes the downloaded filter for transparent pass-through. 
To remove the filter from NVRAM, use the no form of the ssg 
pass-through command.

Router# show ssg host [ip-address] [username]

Displays the information about a subscriber and the current 
connections of the subscriber.

Router# clear ssg host ip-address

Removes a given host or subscriber.

Router# show ssg direction

Displays the direction of all interfaces for which a direction 
has been specified.

Router# show ssg pending-command

Displays current pending commands.

Router# clear ssg pending-command

Removes all pending commands.

Router# show ssg next-hop

Displays the next-hop table.

Router# clear ssg next-hop

Removes the next-hop table. To remove the next-hop table 
from NVRAM, enter the no form of the ssg next-hop 
command. 

Router# show ssg binding

Displays service names that have been bound to interfaces 
and the interfaces to which they have been bound.

Router# show ssg service service-name

Displays the information for a service.

Router# show ssg multidomain ppp exclude-list

Displays the contents of the current PTA-MD exclusion list.

Router# clear ssg service service-name

Removes a service.

Router# debug ssg ctrl-errors

Displays all error messages for control modules.

Router# debug ssg ctrl-events

Displays all event messages for control modules.

Router# debug ssg ctrl-packets

Displays packet contents handled by control modules.

Router# debug ssg data

Displays all data-path packets.

Router# debug ssg data-nat

Displays all data-path packets for NAT processing.

Router# debug ssg errors

Displays all error messages for the system modules.