Cisco Cisco IOS Software Release 12.4(4)T

© 2006 Cisco Systems, Inc. All rights reserved.

The BGP Route-Map Continue Support for Outbound Policy feature introduces support for continue 
clauses to be applied to outbound route maps. The continue clause allows for more programmable policy 
configuration and route filtering and introduces the capability to execute additional entries in a route map 
after an entry is executed with successful match and set clauses. Continue clauses allow the network 
operator to configure and organize more modular policy definitions so that specific policy configurations 
need not be repeated within the same route map.

Configuration information is included in the “Connecting to a Service Provider Using External BGP” 
module of the Cisco IOS BGP Configuration Guide, Release 12.4T,

at the following URL:

The following sections provide information about this feature:

Filtering Traffic Using BGP Route Map Continue Clauses

Filtering Traffic Using a BGP Route Map Continue Clause: Example 

For a complete list of features included in the “Connecting to a Service Provider Using External BGP” 
module, see the Feature Information Table located toward the end of the module.

Command reference information is included in the Cisco IOS IP Routing Protocols Command Reference, 
Release 12.4T, at the following URL:

There are no new or modified commands for this feature.

An alphabetical list of all Cisco IOS Release 12.4T commands is in the Cisco IOS Master Commands 
List, Release 12.4T, at the following URL: