Cisco Cisco IOS Software Release 12.3(4)T
RFC-2867 RADIUS Tunnel Accounting
vpdn tunnel accounting network
20
Cisco IOS Release: Multiple releases (see the Feature History Table)
vpdn tunnel accounting network
To enable tunnel type accounting records to be sent to the RADIUS server, use the vpdn tunnel
accounting network command in global configuration mode. To disable tunnel type accounting records,
use the no form of this command.
accounting network command in global configuration mode. To disable tunnel type accounting records,
use the no form of this command.
vpdn tunnel accounting network list-name
no vpdn tunnel accounting network list-name
Syntax Description
Defaults
Tunnel type accounting records are not sent.
Command Modes
Global configuration
Command History
Usage Guidelines
Before you enable the vpdn tunnel accounting network command, you must enable network
accounting by using the aaa accounting command.
accounting by using the aaa accounting command.
Note
If the default network accounting method list is configured and no additional accounting
configurations are enabled on the interface, network accounting is enabled by default.
configurations are enabled on the interface, network accounting is enabled by default.
If the vpdn tunnel accounting network command is linked to the default method list, all
tunnel accounting records are enabled for those sessions.
tunnel accounting records are enabled for those sessions.
This command displays the following tunnel accounting type records, which are used with the RADIUS
accounting attribute Acct-Status-Type (attribute 40):
accounting attribute Acct-Status-Type (attribute 40):
Tunnel-Start (9)—Marks the beginning of a tunnel setup with another node.
Tunnel-Stop (10)—Marks the end of a tunnel connection to or from another node.
Tunnel-Reject (11)—Marks the rejection of a tunnel setup with another node.
Note
If either Tunnel-Start or Tunnel-Stop are enabled, Tunnel-Reject will be sent, even if it has
not been enabled.
not been enabled.
list-name
Character string used to name the list of at least one accounting method. The
list-name value must match the list-name value defined in the aaa
accounting command; otherwise, network accounting will not occur.
list-name value must match the list-name value defined in the aaa
accounting command; otherwise, network accounting will not occur.
Release
Modification
12.2(15)B
This command was introduced.
12.3(4)T
This command was integrated into Cisco IOS Release 12.3(4)T.