Intel Xeon L3406 CM80616005010AA 用户手册
产品代码
CM80616005010AA
Datasheet, Volume 2
249
Processor Uncore Configuration Registers
4.10.12 MC_CHANNEL_0_BANK_TIMING
MC_CHANNEL_1_BANK_TIMING
This register contains parameters that specify the bank timing parameters. These
values are in DCLK. The values in these registers are encoded where noted. All of these
values apply to commands to the same rank only.
values are in DCLK. The values in these registers are encoded where noted. All of these
values apply to commands to the same rank only.
4.10.13 MC_CHANNEL_0_REFRESH_TIMING
MC_CHANNEL_1_REFRESH_TIMING
This register contains parameters that specify the refresh timings. Units are in DCLK.
Device:
4, 5
Function:
0
Offset:
88h
Access as a DWord
Bit
Attr
Default
Description
31:22
RO
0
Reserved
21:17
RW
0
tWTPr: Minimum Write CAS to Precharge command delay.
16:13
RW
0
tRTPr: Minimum Read CAS to Precharge command delay.
12:9
RW
0
tRCD: Minimum delay between Activate and CAS commands.
8:4
RW
0
tRAS: Minimum delay between Activate and Precharge commands.
3:0
RW
0
tRP: Minimum delay between Precharge command and Activate command.
Device:
4, 5
Function:
0
Offset:
8Ch
Access as a DWord
Bit
Attr
Default
Description
31:30
RO
0
Reserved
29:19
RW
0
tTHROT_OPPREF
The minimum time between two opportunistic refreshes. The ranges should
The minimum time between two opportunistic refreshes. The ranges should
be within tRFC/3 to 4*tRFC. Zero is an invalid encoding. A value of 1 should
be programmed to disable the throttling of opportunistic refreshes. By setting
this field to tRFC, current to a single DIMM can be limited to that required to
support this scenario without significant performance impact:
• 8 panic refreshes in tREFI to one rank
• 1 opportunistic refresh every tRFC to another rank
• full bandwidth delivered by the third and fourth ranks
• 1 opportunistic refresh every tRFC to another rank
• full bandwidth delivered by the third and fourth ranks
Platforms that can supply peak currents to the DIMMs should disable
opportunistic refresh throttling for max performance.
18:9
RW
0
tREFI_8
Average periodic refresh interval divided by 8.
Average periodic refresh interval divided by 8.
8:0
RW
0
tRFC
Delay between the refresh command and an activate or refresh command.
Delay between the refresh command and an activate or refresh command.