Cisco Cisco IOS Software Release 12.4(9)T
RFC 3020 Multilink Frame Relay MIB Support
How to Configure RFC 3020 Multilink Frame Relay MIB Support
3
Cisco IOS Release: Multiple releases
How to Configure RFC 3020 Multilink Frame Relay MIB Support
To configure the RFC 3020 Multilink Frame Relay MIB, you enable the multilink Frame Relay
bundle-mismatch trap by using the following procedure.
bundle-mismatch trap by using the following procedure.
SUMMARY STEPS
1.
enable
2.
configure terminal
3.
snmp-server enable traps frame-relay multilink bundle-mismatch
4.
end
DETAILED STEPS
Command or Action
Purpose
Step 1
enable
Example:
Router> enable
Enables privileged EXEC mode.
•
Enter your password if prompted.
Step 2
configure
terminal
Example:
Router# configure terminal
Enters global configuration mode.
Step 3
snmp-server enable traps frame-relay multilink
bundle-mismatch
Example:
Router(config)# snmp-server enable traps
frame-relay multilink bundle-mismatch
Enters class-map configuration mode and enables
monitoring for multilink Frame Relay.
monitoring for multilink Frame Relay.
Step 4
end
Example:
Router(config-cmap)# end
Exits class-map configuration mode and returns to
privileged EXEC mode.
privileged EXEC mode.