Cisco Cisco IOS Software Release 12.4(11)T
Router IP Traffic Export Packet Capture Enhancements
Configuration Examples for IP Traffic Export
10
Cisco IOS Release 12.4(11)T
DETAILED STEPS
Examples
The following sample output from the show ip traffic-export command is for the profile “one.” This
example is for a single, configured interface. If multiple interfaces are configured, the information below
is displayed for each interface.
example is for a single, configured interface. If multiple interfaces are configured, the information below
is displayed for each interface.
Router# show ip traffic-export
Router IP Traffic Export Parameters
Monitored Interface FastEthernet0/0
Export Interface FastEthernet0/1
Destination MAC address 0030.7131.abfc
bi-directional traffic export is off
Input IP Traffic Export Information Packets/Bytes Exported 0/0
Packets Dropped 0
Sampling Rate one-in-every 1 packets
No Access List configured
No Access List configured
Profile one is Active
Configuration Examples for IP Traffic Export
This section includes the following configuration examples:
•
•
Command or Action
Purpose
Step 1
enable
Example:
Router> enable
Enables privileged EXEC mode.
•
Enter your password if prompted.
Step 2
debug ip traffic-export
events
Example:
Router# debug ip traffic-export events
Enables debugging messages for exported IP traffic packets
events.
events.
Step 3
show ip traffic-export
[interface
interface-name | profile profile-name]
Example:
Router# show ip traffic-export
Displays information related to exported IP traffic events.
•
interface interface-name—Only data associated with
the monitored ingress interface is shown.
the monitored ingress interface is shown.
•
profile profile-name—Only flow statistics, such as
exported packets and the number of bytes, are shown.
exported packets and the number of bytes, are shown.