Cisco Cisco IOS Software Release 12.4(6)T
Corporate Headquarters:
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
© 2006 Cisco Systems, Inc. All rights reserved.
RIPv2
Monitoring
with SNMP Using the RFC 1724
MIB Extensions
First Published: February 27, 2006
Last Updated: February 27, 2006
Last Updated: February 27, 2006
This document describes the Cisco IOS implementation of RFC 1724, RIP Version 2 MIB Extensions.
RFC 1724 defines Management Information Base (MIB) objects that allow you to monitor RIPv2 using
Simple Network Management Protocol (SNMP).
RFC 1724 defines Management Information Base (MIB) objects that allow you to monitor RIPv2 using
Simple Network Management Protocol (SNMP).
Finding Feature Information in This Module
Your Cisco IOS software release may not support all of the features documented in this module. To reach
links to specific feature documentation in this module and to see a list of the releases in which each feature is
supported, use the
links to specific feature documentation in this module and to see a list of the releases in which each feature is
supported, use the
.
Finding Support Information for Platforms and Cisco IOS Software Images
Use Cisco Feature Navigator to find information about platform support and Cisco IOS software image
support. Access Cisco Feature Navigator at
support. Access Cisco Feature Navigator at
. You must have an account on
Cisco.com. If you do not have an account or have forgotten your username or password, click Cancel at
the login dialog box and follow the instructions that appear.
the login dialog box and follow the instructions that appear.
Contents
•
•
•
•
•
Configuration Examples for RIPv2 Monitoring with SNMP Using the RIPv2: RFC124 MIB
Extensions, page 8
Extensions, page 8
•
•