Cisco Cisco IOS Software Release 12.4(2)XB6 技术参考

To clear all the subscribers that belong to this base station, and clear the base station details, use the clear 
wimax agw bs command in global configuration mode.

clear wimax agw bs bs-ip-address

There are no default values.

Privileged EXEC

All clear wimax commands are valid only on the SR ACTIVE card. 

For example:

asngw#clear wimax agw subscriber all

This is STANDBY unit. This command must be issued on the ACTIVE unit

The following example illustrates how to enable the clear wimax agw bs command:

router#clear wimax agw bs bs-ip-address

IP address of a specific base station.

12.4(15)XL

This command was introduced.