Cisco Cisco IOS Software Release 12.4(15)XM 技术参考
debug condition
27
Cisco Mobile Wireless Home Agent Feature for IOS Release 12.4(15)XM2
12.4(15)XM2
debug condition
To limit output for some debug commands based on specified conditions, use the debug condition
command in privileged EXEC mode. To remove the specified condition, use the no form of this
command.
command in privileged EXEC mode. To remove the specified condition, use the no form of this
command.
debug condition {username username | called dial-string | caller dial-string | vcid vc-id | ip
ip-address | calling tid/imsi string]}
no debug condition {condition-id | all}
Syntax Description
Defaults
All debugging messages for enabled protocol-specific debug commands are generated.
Command Modes
Privileged EXEC
Command History
username
username
username
Generates debugging messages for interfaces with the specified username.
called dial-string
Generates debugging messages for interfaces with the called party number.
caller dial-string
Generates debugging messages for interfaces with the calling party number.
vcid vc-id
Generates debugging messages for the VC ID specified.
ip ip-address
Generates debugging messages for the IP address specified.
calling tid/imsi
string
string
Displays events related to general packet radio service (GPRS) tunneling
protocol (GTP) processing on the gateway GPRS support node (GGSN) based on
the tunnel identifier (TID) or international mobile system identifier (IMSI) in a
Packet Data Protocol (PDP) Context Create Request message.
protocol (GTP) processing on the gateway GPRS support node (GGSN) based on
the tunnel identifier (TID) or international mobile system identifier (IMSI) in a
Packet Data Protocol (PDP) Context Create Request message.
condition-id
Removes the condition indicated.
all
Removes all debugging conditions, and conditions specified by the debug
condition interface command. Use this keyword to disable conditional debugging
and reenable debugging for all interfaces.
condition interface command. Use this keyword to disable conditional debugging
and reenable debugging for all interfaces.
Release
Modification
11.3(2)AA
This command was introduced.
12.0(23)S
This command was integrated into Cisco IOS Release 12.0(23)S. This
command was updated with the vcid and ip keywords to support the
debugging of Any Transport over MPLS (AToM) messages.
command was updated with the vcid and ip keywords to support the
debugging of Any Transport over MPLS (AToM) messages.
12.2(14)S
This command was integrated into Cisco IOS Release 12.2(14)S.
12.2(15)T
This command was integrated into Cisco IOS Relese 12.2(15)T.
12.3(2)XB
This command was introduced on the GGSN.
12.3(8)T
The calling keyword and tid/imsi string argument were added.