Cisco Cisco IOS Software Release 12.2(35)SE 發佈版本通知
Americas Headquarters:
© 2007 Cisco Systems, Inc. All rights reserved.
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Release Notes for the
Cisco ME 3400 Ethernet Access Switch,
Cisco IOS Release 12.2(37)SE and Later
Cisco ME 3400 Ethernet Access Switch,
Cisco IOS Release 12.2(37)SE and Later
Revised August 8, 2007
Cisco IOS Release 12.2(37)SE and12.2(37)SE1 run on the Cisco ME 3400 Series Ethernet Access
switches.
switches.
These release notes include important information about Cisco IOS Release 12.2(37)SE, Cisco IOS
Release12.2(37)SE1, and any limitations, restrictions, and caveats that apply to the releases. Verify that
these release notes are correct for your switch:
Release12.2(37)SE1, and any limitations, restrictions, and caveats that apply to the releases. Verify that
these release notes are correct for your switch:
•
If you are installing a new switch, see the Cisco IOS release label on the rear panel of your switch.
•
If your switch is on, use the show version privileged EXEC command. See the
•
If you are upgrading to a new release or different image, see the software upgrade filename for the
software version. See the
software version. See the
For the complete list of Cisco ME 3400 switch documentation, see the
You can download the switch software from this site (registered Cisco.com users with a login password):
http://www.cisco.com/kobayashi/sw-center/index.shtml
This software release is part of a special release of Cisco IOS software that is not released on the same
8-week maintenance cycle that is used for other platforms. As maintenance releases and future software
releases become available, they will be posted to Cisco.com in the Cisco IOS software area.
8-week maintenance cycle that is used for other platforms. As maintenance releases and future software
releases become available, they will be posted to Cisco.com in the Cisco IOS software area.
Contents
This information is in the release notes:
•
•
•