Cisco Cisco IOS Software Release 12.2(35)SE 發佈版本通知

You cannot create and manage switch clusters through the device manager. To create and manage switch 
clusters, use the command-line interface (CLI) or the Network Assistant application. 

When creating a switch cluster or adding a switch to a cluster, follow these guidelines:

When you create a switch cluster, we recommend configuring the highest-end switch in your cluster 
as the command switch.

If you are managing the cluster through Network Assistant, the switch with the latest software 
should be the command switch. 

The standby command switch must be the same type as the command switch. For example, if the 
command switch is a Catalyst 3750-E switch, all standby command switches must be 
Catalyst 3750-E switches. 

For additional information about clustering, see Getting Started with Cisco Network Assistant and 
Release Notes for Cisco Network Assistant (not orderable but available on Cisco.com), the software 
configuration guide, and the command reference.

Cisco IOS 12.2(35)SE2 and later is only compatible with Cisco Network Assistant 5.0 and later. You can 
download Network Assistant from this URL:

http://www.cisco.com/pcgi-bin/tablebuild.pl/NetworkAssistant

For more information about Cisco Network Assistant, see the Release Notes for Cisco Network Assistant 
on Cisco.com.

These are the procedures for downloading software. Before downloading software, read this section for 
important information:

1.

Service Pack 1 or higher is required for Internet Explorer 5.5.

Windows 2000

None

5.5 or 6.0

7.1

Windows XP

None

5.5 or 6.0

7.1