Cisco Cisco IOS Software Release 12.2(27)SBC
Americas Headquarters:
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
© 2006, 2007 Cisco Systems, Inc. All rights reserved.
Per-VRF Assignment of BGP Router ID
First Published: June 19, 2006
Last Updated: August 21, 2007
Last Updated: August 21, 2007
The Per-VRF Assignment of BGP Router ID feature introduces the ability to have VRF-to-VRF peering
in Border Gateway Protocol (BGP) on the same router. BGP is designed to refuse a session with itself
because of the router ID check. The per-VRF assignment feature allows a separate router ID per VRF
using a new keyword in the existing bgp router-id command. The router ID can be manually configured
for each VRF or can be assigned automatically either globally under address family configuration mode
or for each VRF.
in Border Gateway Protocol (BGP) on the same router. BGP is designed to refuse a session with itself
because of the router ID check. The per-VRF assignment feature allows a separate router ID per VRF
using a new keyword in the existing bgp router-id command. The router ID can be manually configured
for each VRF or can be assigned automatically either globally under address family configuration mode
or for each VRF.
Finding Feature Information in This Module
Your Cisco IOS software release may not support all of the features documented in this module. To reach
links to specific feature documentation in this module and to see a list of the releases in which each feature is
supported, use the
links to specific feature documentation in this module and to see a list of the releases in which each feature is
supported, use the
.
Finding Support Information for Platforms and Cisco IOS and Catalyst OS Software Images
Use Cisco Feature Navigator to find information about platform support and Cisco IOS and Catalyst OS
software image support. To access Cisco Feature Navigator, go to
software image support. To access Cisco Feature Navigator, go to
. An
account on Cisco.com is not required.
Contents
•
•
•
•
•
•
•
•