Cisco Cisco IOS Software Release 12.2(53)SE 發佈版本通知

Error Message DOT1X_SWITCH-5-ERR_VLAN_ON_ROUTED_PORT: Dot1x cannot assign a VLAN 
[dec] to a routed port [chars]

An attempt was made to assign a VLAN to a supplicant on a routed port, which is not 

allowed. [dec] is the VLAN ID and [chars] is the port. 

Either disable the VLAN assignment, or change the port type to a nonrouted 

port. 

Error Message DOT1X_SWITCH-5-ERR_VLAN_PROMISC_PORT: Attempt to assign VLAN [dec] to 
promiscuous 802.1x port [chars] 

An attempt was made to assign a VLAN to a promiscuous IEEE 802.1x port, which is 

not allowed. [dec] is the VLAN, and [chars] is the port. 

Change the port mode so that it is no longer a promiscuous port, or change the 

configuration so that no VLAN is assigned. 

Error Message DOT1X_SWITCH-5-ERR_VLAN_RESERVED: Attempt to assign reserved VLAN 
[dec] to 802.1x port [chars] 

An attempt was made to assign an invalid VLAN to an IEEE 802.1x port. The VLAN 

specified is a reserved VLAN and cannot be assigned to this port. [dec] is the VLAN, and [chars] is 
the port. 

Assign a different VLAN. 

Error Message DOT1X_SWITCH-5-ERR_VLAN_RSPAN: Attempt to assign RSPAN VLAN [dec] to 
802.1x port [chars]. 802.1x is incompatible with RSPAN 

This message means that remote SPAN should not be enabled on a VLAN with 

IEEE 802.1x-enabled. [dec] is the VLAN, and [chars] is the port. 

Either disable remote SPAN configuration on the VLAN, or disable 

IEEE 802.1x on all the ports in this VLAN. 

Error Message SW_VLAN-4-VTP_USER_NOTIFICATION: VTP protocol user notification: 
[chars]. 

This message means that the VTP code encountered an unusual diagnostic situation. 

[chars] is a description of the situation. 

Find out more about the error by using the show tech-support privileged 

EXEC command. Copy the message exactly as it appears on the console or in the system log. 
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to 
look for similar reported problems. If you still require assistance, open a case with the TAC, or 
contact your Cisco technical support representative, and provide the representative with the gathered 
information.