Cisco Cisco IOS Software Release 12.2(58)SE 發佈版本通知
Americas Headquarters:
© 2011 Cisco Systems, Inc. All rights reserved.
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Release Notes for Cisco Catalyst Blade
Switch 3120 for HP,
Cisco IOS Release 12.2(58)SE1
Switch 3120 for HP,
Cisco IOS Release 12.2(58)SE1
Revised December 22, 2011
Note
Cisco IOS Release 12.2(58)SE images for all platforms were removed from Cisco.com because of a
severe defect, CSCto62631. The solution for the defect is in Cisco IOS Release 12.2(58)SE1.
severe defect, CSCto62631. The solution for the defect is in Cisco IOS Release 12.2(58)SE1.
Cisco IOS Release 12.2(58)SE1 runs on the Cisco Catalyst Blade Switch 3120 for HP switches. These
switches support stacking through Cisco StackWise Plus technology. Unless otherwise noted, the term
switch refers to a standalone switch and to a switch stack.
switches support stacking through Cisco StackWise Plus technology. Unless otherwise noted, the term
switch refers to a standalone switch and to a switch stack.
These release notes include important information about Cisco IOS Release 12.2(58)SE1 and later and
any limitations, restrictions, and caveats that apply to it. Verify that these release notes are correct for
your switch:
any limitations, restrictions, and caveats that apply to it. Verify that these release notes are correct for
your switch:
•
If you are installing a new switch, see the Cisco IOS release label on the rear panel of your switch.
•
If your switch is on, use the show version privileged EXEC command. See the
•
If you are upgrading to a new release, see the software upgrade filename for the software version.
See the
See the
You can download the switch software from this site (registered Cisco.com users with a login password):
For the complete list of the Cisco Catalyst Blade Switch 3120 for HP documentation, see the
Note
References in this document to the CBS3120G-S and CBS3120X-S switches also apply to the
CBS3125G-S and CBS3125X-S switches, respectively.
CBS3125G-S and CBS3125X-S switches, respectively.