Cisco Cisco IOS Software Release 15.0(1)SE 發佈版本通知
Americas Headquarters:
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
© 2015 Cisco Systems, Inc. All rights reserved.
Release Notes for the Cisco Catalyst Blade
Switch 3130 and 3032 for Dell, Cisco IOS
Release 15.0(2)SE and Later
Switch 3130 and 3032 for Dell, Cisco IOS
Release 15.0(2)SE and Later
November 10, 2016
Cisco IOS Release 15.0(2)SE runs on the Cisco Catalyst Blade Switch 3130 and 3032 for Dell switches.
The Cisco Catalyst Blade Switch 3130 supports support stacking through Cisco StackWise Plus
technology. Unless otherwise noted, the term switch refers to a standalone switch and to a switch stack.
The Cisco Catalyst Blade Switch 3130 supports support stacking through Cisco StackWise Plus
technology. Unless otherwise noted, the term switch refers to a standalone switch and to a switch stack.
Note
The Cisco Catalyst Blade Switch 3032 does not support stacking.
These release notes include important information about Cisco IOS Release 15.0(2)SE and later and any
limitations, restrictions, and caveats that apply to it. Verify that these release notes are correct for your
switch:
limitations, restrictions, and caveats that apply to it. Verify that these release notes are correct for your
switch:
•
If you are installing a new switch, see the Cisco IOS release label on the rear panel of your switch.
•
If your switch is on, use the show version privileged EXEC command. See the
•
If you are upgrading to a new release, see the software upgrade filename for the software version.
See the
See the
You can download the switch software from this site (registered Cisco.com users with a login password):
For the complete list of the Cisco Catalyst Blade Switch 3130 and 3032 for Dell documentation, see the
.
•
•
•