Cisco Cisco ASA 5555-X Adaptive Security Appliance 發佈版本通知

下载
页码 30
 
20
Release Notes for Cisco ASDM, Version 6.3(x)
 
  Unsupported Commands
Effects of Unsupported Commands
If ASDM loads an existing running configuration and finds other unsupported commands, ASDM 
operation is unaffected. To view the unsupported commands, choose Tools > Show Commands Ignored 
by ASDM on Device
.
Discontinuous Subnet Masks Not Supported
ASDM does not support discontinuous subnet masks such as 255.255.0.255. For example, you cannot 
use the following:
ip address inside 192.168.2.1 255.255.0.255
Interactive User Commands Not Supported by the ASDM CLI Tool
The ASDM CLI tool does not support interactive user commands. If you enter a CLI command that 
requires interactive confirmation, ASDM prompts you to enter “[yes/no]” but does not recognize your 
input. ASDM then times out waiting for your response. 
For example: 
1.
Choose Tools > Command Line Interface.
2.
Enter the crypto key generate rsa command.
ASDM generates the default 1024-bit RSA key.
3.
Enter the crypto key generate rsa command again.
pim accept-register route-map
Ignored. You can configure only the list option 
using ASDM.
prefix-list
Ignored if not used in an OSPF area.
service-policy global
Ignored if it uses a match access-list class. For 
example:
access-list myacl line 1 extended permit ip 
any any
class-map mycm
match access-list mycl
policy-map mypm
class mycm
inspect ftp
service-policy mypm global
set metric
Ignored.
sysopt nodnsalias
Ignored.
sysopt uauth allow-http-cache
Ignored.
terminal
Ignored.
1.
ASA 8.3(2) and above.
Table 8
List of Unsupported Commands
 (continued)
Unsupported Commands
ASDM Behavior