Cisco Cisco ASA 5515-X Adaptive Security Appliance - No Payload Encryption 技术手册
Note: The
of the older, unsupported, commands such as apply, outbound or conduit to the appropriate
access-list. The converted statements need to be reviewed thoroughly. It is necessary to verify
that the conversion matches the security policies.
access-list. The converted statements need to be reviewed thoroughly. It is necessary to verify
that the conversion matches the security policies.
Note: The process for the upgrade to a new ASA appliance is different from an upgrade to a new
PIX appliance. An attempt to upgrade to an ASA with the PIX process generates a number of
configuration errors on the ASA.
PIX appliance. An attempt to upgrade to an ASA with the PIX process generates a number of
configuration errors on the ASA.
Troubleshoot - Manual Configuration Conversion
Device Stuck in Reboot Loop
After you use the copy tftp flash method in order to upgrade the PIX, and reboot, it gets
stuck in this reboot loop:
stuck in this reboot loop:
Cisco Secure PIX Firewall BIOS (4.0)
#0:
Thu Mar 2 22:59:20 PST 2000
Platform PIX-515
Flash=i28F640J5 @ 0x300
Use BREAK or ESC to interrupt flash boot.
Use SPACE to begin flash boot immediately.
Reading 5063168 bytes of image from flash.
PIX appliances with BIOS versions earlier than
4.2 cannot be upgraded with the use of the copy tftp flash command. You must upgrade
them with the Monitor Mode method.
them with the Monitor Mode method.
●
After the PIX runs 7.x, and reboots, it gets stuck in this reboot loop:
Rebooting....
Cisco Secure PIX Firewall BIOS (4.0) #0: Thu Mar 2 22:59:20 PST 2000
Platform PIX-515
Flash=i28F640J5 @ 0x300
Use BREAK or ESC to interrupt flash boot.
Use SPACE to begin flash boot immediately.
Reading 115200 bytes of image from flash.
PIX Flash Load Helper
Initializing flashfs...
flashfs[0]: 10 files, 4 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 15998976
flashfs[0]: Bytes used: 1975808
flashfs[0]: Bytes available: 14023168
flashfs[0]: Initialization complete.
Unable to locate boot image configuration
Booting first image in flash
No bootable image in flash. Please download
an image from a network server in the monitor mode
Failed to find an image to boot
If the PIX is upgraded from Monitor Mode to 7.0, but the 7.0 image is not re-copied into Flash
after the first boot of 7.0, then when the PIX is reloaded, it becomes stuck in a reboot loop.The
resolution is to load the image again from Monitor Mode. After it boots, you must copy the
image one more time with the use of the copy tftp flash method.
after the first boot of 7.0, then when the PIX is reloaded, it becomes stuck in a reboot loop.The
resolution is to load the image again from Monitor Mode. After it boots, you must copy the
image one more time with the use of the copy tftp flash method.
●