Cisco Cisco 4404 Wireless LAN Controller 技术参考
28
Deployment Guide for Cisco Guest Access Using the Cisco Wireless LAN Controller, Release 4.1
OL-13691-01
Web Authentication Process
Step 3
Click Save Configuration.
To enable an external RADIUS server to authenticate traffic using CLI, follow these steps:
Step 1
Enter config radius auth ip-address to configure a RADIUS server for authentication.
Step 2
Enter config radius auth port to specify the UDP port for authentication.
Step 3
Enter config radius auth secret to configure the shared secret.
Step 4
Enter config radius auth enable to enable authentication.
Note
Authentication is disabled by default.
Step 5
Enter config radius acct disable to disable authentication.
Note
You can enter the show radius acct statistics, show radius auth statistics, and show radius summary
commands to verify that the RADIUS settings are correctly configured.
commands to verify that the RADIUS settings are correctly configured.
Web Authentication Using an External Web Server
To use a custom web authentication login window configured on an external web server rather than the
default web login window of Cisco’s wireless LAN controller, follow the instructions in the GUI or CLI
procedure below.
default web login window of Cisco’s wireless LAN controller, follow the instructions in the GUI or CLI
procedure below.
When you enable this feature, the user is automatically directed to your custom login window on the
external web server.
external web server.