Cisco Cisco 4404 Wireless LAN Controller 技术参考

Deployment Guide for Cisco Guest Access Using the Cisco Wireless LAN Controller, Release 4.1

OL-13691-01

Client Login

Modifying the PC to Support Wireless Guest Access

To support guest access on your PC, follow these steps:

Note

The Microsoft Wireless Client on your PC requires minimal changes to support guest access.

Step 1

From your Windows Start button, launch the Settings > Control Panel.

Step 2

Click the Network and Internet Connections icon.

Step 3

Click the Network Connections icon.

Step 4

Right click the LAN Connection icon and select Disable.

Step 5

Right click the Wireless Connection icon and select Enable.

Step 6

Right click the Wireless Connection icon again and select Properties.

Step 7

From the Wireless Network Connection Properties window, select the Wireless Networks tab.

Step 8

Change the Network Name in the Preferred Network area. Remove the old SSID
and then click on the Add… button.

Step 9

In the Association tab, type in the Network Name (SSID) value you will be using for Web
Authentication.

Note

Notice that WEP is enabled. You must disable WEP for Web authentication to work.

Step 10

Select OK to save the configuration.

When you are actively communicating with the wireless LAN you will see a beacon icon in the preferred
network box.

Client Login

Once the web authentication

method is defined and the client changes are made to the guest user’s PC,

the user can log on.

To log on as a guest user, follow these steps:

Step 1

Open a browser window and enter the IP address of the authenticating server (see

Note

Be sure you use secure https:// when authenticating the user with the controller’s web server.