Cisco Cisco 5508 Wireless Controller 安装指南
23
Cisco 5508 Wireless Controller Installation Guide
78-18998-01
Unpacking and Installing the Controller
The bootup script displays operating system software initialization (code download and POST
verification) and basic configuration as shown in the following sample bootup display:
verification) and basic configuration as shown in the following sample bootup display:
WLCNG Boot Loader Version 0.14.0 (Built on Dec 22 2008 at 11:54:51 by cisco)
Board Revision 1.2 (SN: FCW1303L04E, Type: AIR-CT5508-K9) (G)
Verifying boot loader integrity... OK.
. . .
IDE device 0:
- Model: VI DFC1024MB Firm: 20071116 Ser#: DFC1GB 00000E52
- Type: Removable Hard Disk
- Capacity: 967.6 MB = 0.9 GB (1981728 x 512)
Press <ESC> now to access the Boot Menu...
Step 4
If desired, press Esc to display the Bootloader Boot Options menu.
Boot Options
Please choose an option from below:
1. Run primary image
2. Run backup image
3. Change active boot image
4. Clear Configuration
5. Format FLASH Drive
6. Manually update images
Please enter your choice:
Note
Enter 1 to run the current software, enter 2 to run the previous software, or enter 4 to run the
current software and set the controller configuration to factory defaults. Do not choose the other
options unless directed to do so.
current software and set the controller configuration to factory defaults. Do not choose the other
options unless directed to do so.
Only options 1 through 3 are available in FIPS mode.
Step 5
The rest of the process takes two to three minutes. Do not reboot the controller until the user login
prompt appears.
prompt appears.
Detecting Hardware . . .
Cryptographic library self-test....passed!
. . .
Cisco is a trademark of Cisco Systems, Inc.
Software Copyright Cisco Systems, Inc. All rights reserved.
Cisco AireOS Version 6.0.100.1
Initializing OS Services: ok
. . .
Starting SSHPM LSC PROV LIST: ok
Starting Management Services:
Web Server: ok
CLI: ok
Secure Web: ok
License Agent: ok