Cisco Cisco Email Security Appliance C380 技术参考
3-26
CLI Reference Guide for AsyncOS 10.0 for Cisco Email Security Appliances
Chapter 3 The Commands: Reference Examples
Configuration File Management
Warning
The
resetconfig
command will return all network settings to factory defaults, potentially
disconnecting you from the CLI, disabling services that you used to connect to the appliance (FTP,
Telnet, SSH, HTTP, HTTPS), and even removing additional user accounts you created with the
Telnet, SSH, HTTP, HTTPS), and even removing additional user accounts you created with the
userconfig
command. Do not use this command if you are not able to reconnect to the CLI using the
Serial interface or the default settings on the Management port through the default Admin user
account.
account.
Usage
Commit: This command does not require a ‘commit’.
Cluster Management: This command is restricted to machine mode. It is further restricted to the login
host (i.e., the specific machine you are logged onto). This command requires access to the local file
system.
host (i.e., the specific machine you are logged onto). This command requires access to the local file
system.
Batch Command: This command does not support a batch format.
Example
mail3.example.com> suspend
Delay (seconds, minimum 30):
[30]> 45
Waiting for listeners to exit...
Receiving suspended.
Waiting for outgoing deliveries to finish...
Mail delivery suspended.
mail3.example.com> resetconfig
Are you sure you want to reset all configuration values? [N]> Y
All settings have been restored to the factory default.
saveconfig
Description
The
saveconfig
command saves the configuration file with a unique filename to the
configuration
directory.
Note
If you are on a clustered environment, this command saves the complete cluster configuration. To run
this command on a clustered machine, change your configuration mode to cluster.
this command on a clustered machine, change your configuration mode to cluster.
Usage
Commit: This command does not require a ‘commit’.
Cluster Management: This command can be used in all three machine modes (cluster, group, machine).