Cisco Cisco Email Security Appliance C190 产品宣传页

3-238

AsyncOS 9.6 for Cisco Email Security Appliances CLI 참조 가이드

3 장 명령: 참조 예제

로깅 및 알림

mail3.example.com> snmpconfig

Current SNMP settings:

SNMP Disabled.

Choose the operation you want to perform:

- SETUP - Configure SNMP.

[]> setup

Do you want to enable SNMP? [N]> y

Please choose an IP interface for SNMP requests.

1. Data 1 (192.168.1.1/24: buttercup.run)

2. Data 2 (192.168.2.1/24: buttercup.run)

3. Management (192.168.44.44/24: buttercup.run)

[1]>

Enter the SNMPv3 passphrase.

Please enter the SNMPv3 passphrase again to confirm.

Which port shall the SNMP daemon listen on?

[161]>

Service SNMP V1/V2c requests? [N]> y

Enter the SNMP V1/V2c community string.

[]> public

From which network shall SNMP V1/V2c requests be allowed?

[192.168.2.0/24]>

Enter the Trap target (IP address). Enter "None" to disable traps.

[None]> snmp-monitor.example.com

Enterprise Trap Status

1. RAIDStatusChange Enabled

2. fanFailure Enabled

3. highTemperature Enabled

4. keyExpiration Enabled

5. linkDown Enabled

6. linkUp Enabled

7. powerSupplyStatusChange Enabled

8. resourceConservationMode Enabled

9. updateFailure Enabled

Do you want to change any of these settings? [N]> y

Do you want to disable any of these traps? [Y]>

Enter number or numbers of traps to disable. Separate multiple numbers with commas.

[]> 1,8