AirLive POE-FSH804 产品宣传页
5F, No.96, Min-ChuanRd, Hsin-tien City, Taipei, Taiwan
Standard
- IEEE 802.3i 10BASE-T
- IEEE 802.3u 100BASE-TX
- IEEE 802.3x Flow Control
- IEEE 802.3af DTE Power via MDI (12,36 pin)
- IEEE 802.3u 100BASE-TX
- IEEE 802.3x Flow Control
- IEEE 802.3af DTE Power via MDI (12,36 pin)
Interface
- 8 x 10/100Mbps RJ-45 switch ports
Power Supply
- Total Power Consumption: 60 W maximum
- 802.3af Power Consumption: 55 W maximum
- 802.3af Power Consumption: 55 W maximum
(Ports 1 – 4)
- External power: 48VDC, 1.25A power output
Forwarding mode
- Store-and-forward
Bandwidth
- 1.6 Gbps
Buffer memory
- 512 Kb
Address table
- 1K
Emission
- FCC Class A, CE, VCCI
LED indicators
- System: Power, PoE Maximum Power (55W)
- Per Port: Link/Activity, Speed, PoE Active
- Per Port: Link/Activity, Speed, PoE Active
Temperature
- Operating: 0 to 45°C
- Storage: -10 to 70°C
- Storage: -10 to 70°C
Humidity
- Operating: 10% ~ 90% (non-condensing)
- Storage: 10% ~ 90% (non-condensing)
- Storage: 10% ~ 90% (non-condensing)
Certification
- CE
- FCC Part 15 Class B
- LVD EN60950
- FCC Part 15 Class B
- LVD EN60950
Produce Weight (g)
- 600 g
Dimensions
- 123.1 x 189.2 x 31.9 mm
AirLive POE -FSH804
8-port Fast Ethernet Switch with 4-port PoE
Ordering Information:
Specifi cations
* Priority: Priority of port 1 is higher than port 2 (port 1> port 2> port 3 > port 4). For example, Port 1, 2 and 4 are using 15.4w
(maximum power per port is 15.4W), the system power is 46.2w in total (PoE max LED is red ). If there is an additional PD
connected to Port 3 with 10W then the system will stop supplying power to Port 4 for protecting the system, this means Port 1,
2 will use 15.4w, and Port3 will use 10w, and system will not supply power to Port 4.
connected to Port 3 with 10W then the system will stop supplying power to Port 4 for protecting the system, this means Port 1,
2 will use 15.4w, and Port3 will use 10w, and system will not supply power to Port 4.